AHJ-05 Visor Ratchet System

Model: AC-3


ac3_install_new_1.png 1. Ensure that the locking arm is in the open position.
















ac3_install_new_2.png 2. Align the visor with the base-plate channel. The visor should be in an open or upwards position for proper alignment. The visor should slide within the base-plate channel to a full stop. Close the locking arm before rotating the visor to the closed position.














ac3_remove_3.png 3. Push the visor downward to the full close position. The lower edge of the visor side plate should align with the helmet shell.